The
Snappi? is a safe, hygienic and easy-to-use
diaper fastener that offers a practical and reliable way to
fasten a prefold, replacing the
diaper pin.
It comes in a variety of colors and is made from a stretchable non-toxic material, which is T-shaped with grips on each end. These grips hook into the diaper fabric to ensure a snug-fitting diaper with enough natural movement for the baby.
The benefits of the Snappi? diaper fastener include:
- SAFER THAN PINS - no more pinpricks for baby or parent!!
- RELIABLE - a snug fitting diaper to prevent those dreaded leaks
- DURABLE - no snaps that can become brittle/rust, nor any velcro to catch all the fluff in the wash!
- ECONOMICAL - inexpensive and saves parents who wish to cloth diaper from having to purchase expensive diapers as they can be used on flat or prefold cloth diapers
- HYGIENIC and EASY TO USE - allows first time parents, grandparents and people with arthritic problems to cloth diaper with ease. It is as easy as 1-2-3
DIRECTIONS FOR USE:
- STRETCH the Snappi??fastener before its first use. The stretching triggers the 'memory' of the Snappi? to return to its original size and in so doing, pulls the diaper together to the middle to allow for a snug fit. This is essential for the Snappi? to work properly. This can be done by holding the Snappi? in the center with one hand and close to the end of the leg with the other hand. Then stretch a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi? is now ready to go!
- Make sure that the Snappi? is ATTACHED SECURELY. It is important that the Snappi? 'leg' being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi?, hold onto the solid part of the tab. DO NOT pull on the loops. So,
Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center
In other words, the Snappi? fastener should go from a "T" shape to a "Y" shape.
By following these instructions, the Snappi
? should be secure and the diaper will fit snugly.
ALWAYS place a cover over the diaper and Snappi? fastener.
The
Snappi? is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains
NO latex or any other adulterant, dilutent or modifying polymers.
WARNINGS:
- ALWAYS use a cover when using a Snappi? fastener with your baby?s diaper.
- Keep out of children's reach when not in use!
- Do NOT use a Snappi? fastener on toddlers that have the ability to undo their cover and take off their diaper and/or clothes.
- Do not use your Snappi? for longer than 6 months.
- Do not leave your Snappi? lying in the sun as it is not UV resistant and can reduce the effectiveness of the Snappi?.
CARE:
Clean your Snappi
? in hot soapy water.
Do not launder them with diapers in the washer as this may weaken the grip attachment.
Made of 100% polyurethane.
Made in South Africa.
A note about sizes and colours:
Size 1 available in all colours shown.
Size 2 available in white only.
Size 2 is intended for larger babies and young toddlers.
It is generally recommended for children aged 16 months+.
BUY NOW:
Visit our store located at 4782 Wyandotte St. E, Windsor, Ontario
Rest of Canada: Order by phone or email:
519-800-3963 / info@sweetheartdiapers.com
NEXT DAY SHIPPING!
